How to draw a straight line in Photoshop. Photoshop lesson. How to draw a line in Photoshop

Good day, dear readers of my blog. It would seem, what does it cost to draw a straight line in Photoshop? Hold down Shift and there you go. Nevertheless, this can be done in as many as three ways. Everyone's result will be different.

In this article you will learn three ways to draw a straight line in Photoshop. Which filter to use to create a wave. How to do this with the help of another interesting instrument. I'll show you how to achieve a dotted line and draw at a certain angle.

A lot of information awaits you. Shall we get started?

Line Tool

First, I'll show you how to use a tool that's designed to create straight lines. In this place you can have a rectangle, oval, ellipse or polygon. Just hold down the left mouse button for a few seconds to open a menu with additional tools.

First things first. One of the most important parameters is thickness. Thanks to the line, you can even draw rectangles. You just need to make it fatter.

Next comes “Fill” and “Stroke”. Click on the color block to the left of the inscriptions and select a shade. If you want to make a stroke, enter its width. Now, my screenshot shows the option without it. The no color icon looks like this. Gray line crossed out in red.

You can see the settings and the result in this screenshot. It's not very visible, but the thickness here is 30 pixels. In a large picture, 30 pixels may look like a modest stripe. Everything needs to be adjusted to your own dimensions.

This is what the line will look like if you select red for the stroke.

The next button will allow you to create a dotted stroke.

If you reduce the thickness and remove the fill, you will just get a dotted line.

Here you can align the stroke to the inner edge, outer edge, or center of your outline.

And round the corners. True, it will not be so noticeable.

If you press Shift while you are drawing a line, Photoshop will automatically create straight line. Horizontal or vertical. Depending on where you are taking her.

If you need a line at a certain angle, then the easiest way is to look at what the information window shows and adjust it manually, pointing it in a certain direction.

Well, now I’ll show you another one.

Brush Tool

I drew these rectangles using lines drawn with a brush.

Choose the type and size that suits your brush line.

Place a dot at the expected beginning of the line, hold down Shift and left-click where the strip should end.

There are two lines in front of you. The yellow one was painted using the Line tool, and the purple one was painted with a brush.

How to make a wave

No matter what tool you used, do wavy line The easiest way is to use a filter. Go to this category, find “Distortion” and select “Wave”.

Based on the preview picture, you will quickly understand what's what and how to set it up. The amplitude should be approximately the same. If it doesn’t work, you can just click on “Randomize” until a suitable one appears.

The last applied filter is always quickly accessible. I apply it to the layer with the yellow stripe drawn with the tool.

This is the result I got. As you can see, it is different.

Pen Tool

To be honest, I still can’t use a pen professionally. I know that you can draw anything with it: smoothly, quickly, fun and cool, but it takes me a lot of time and the result is not always at the level I expected. And yet I can even draw straight lines with a pen. It's worse with curves, but I'll try. I select “Feather”.

I put a dot, then a second one. While I haven't released the mouse button, I adjust the smoothness.

I do the same thing with each new point.

After all the manipulations are completed, right-click and select “Stroke outline” from the menu that appears.

You can choose several tools: pencil, brush, stamp, pattern, and so on. Now let this one be a brush.

I press the right mouse button again and select “Delete outline”.

This is the result I got.

Well, don’t forget that you can always use your collage making skills. Read the article about how to take a line from any picture and insert it into your image.

If you want to learn how to professionally use the pen and other tools found in Photoshop. I can offer you a course " Photoshop for beginners in video format ».

Lessons created by professionals will teach you everything you need to know about this program. You will save a lot of time searching for answers to this or that question. Ideas will spontaneously appear in your head on how to complete the task.

By the way, do you know how to make sure that you always have interesting needs related to Photoshop? This may take your relationship with this program to the level of new level. All you need is to be passionate about web design. People of this profession never sit idle. There are always clients, projects and new tasks.

There is a job for everyone, and you can do what you really like and bring good money. Read the article about or. Stop inventing tasks for yourself, let someone else pay money for your time.

Don't know where to start? Take the course Commercial Web Design Basics " Try a few free lessons, this will help you understand yourself and understand whether you are ready to explore new horizons.

OK it's all over Now. It's up to you. Decide when you are ready and start conquering new heights. If you liked this article, subscribe to the newsletter and take one step closer to your cherished goal every day.

Learn as much as you can about the Internet, write your success story, stop sitting around waiting. Take action. Your dream is realized by others every day. Today they are doing what you have been wanting for so long. Do they think about preparedness? The right moment is right now. Don't miss it. You have the strength to do this.

I wish you good luck. Until next time.

IN Adobe Photoshop There are a huge number of built-in functions that can be used to create various objects, retouch photos and more. A novice user who has just begun to comprehend the basics of this program would do well to consider the problem of how to draw a straight line in Photoshop. And those who have been in this environment for a long time may be interested in remembering the basic ways of drawing a straight line. One method or another will be useful in individual cases.

How to draw a straight line in Photoshop?

There are many ways and techniques for drawing various lines and elements. But before you draw a straight line in Photoshop, you need to keep in mind that there are three basic and quick ways to draw lines: the Brush, Pen, and Line tools. Despite their simplicity, it can be assumed that everyone has their own drawing technique and each user chooses the tool himself, guided by his preferences and the task that faces him.

Brush tool

The simplest and most understandable method is drawing using the Pencil and Brush tools in Photoshop. It is worth keeping in mind that these tools draw and do not create some kind of object, so the image of the lines will be on the selected layer itself. You can avoid this situation and draw the line on a separately created layer. In this case, you can edit the brush mark without restrictions without harming other layers.

To draw a line, just select the Brush or Pencil tool. Then click on the left mouse button and use the cursor to set the direction of the line. In addition, you can use the right mouse button to open an auxiliary window with settings, where you can select the type of brush, determine the hardness and shape of the tip.

A straight line can be drawn using the tool in question using the method of multiple magnifications of the image. The closer the image is, the greater the chances of drawing a more or less straight line manually. A perfectly straight line can be created by holding down the Shift key and using the same Brush/Pencil tool. By activating the right tool, hold down the left mouse button and the Shift key - we observe the construction of a straight line, controlled by the cursor.

Line tool

There is another way to draw a straight line using the Line Tool in Photoshop. The quick access panel includes a block that combines a number of geometric tools, including the one in question. The created lines will be distributed into new layers, which will be formed automatically after constructing a straight line.

Before drawing a straight line in Photoshop, you need to select the tool of the same name and click on the left mouse button at the point where the beginning of this element will be. To complete the construction, you need to click on the LMB again.

The convenience of this method is that lines can be combined into a common layer and provide full editing of a group of constructed elements. The merged layer, after finishing work on it, can be rasterized, but working with the merged elements in vector graphics format will no longer be possible. You can format a rasterized layer in the same way as others. Another advantage is the fact that you can edit the lines themselves without losing quality. The vector line editing menu is located at the top of the program - its header. Here you can set the line color, its outline, shape and thickness.

Pen tool

A universal tool for creating shapes of varying complexity. With this function and the multiple magnification method, you can select new figure hard-to-reach areas in the image. So, for example, you can draw both straight lines in Photoshop and curves. Mastering this tool is extremely important - it is used everywhere in many creative works, when it is necessary to cut out an image or create a new graphic interpretation.

How the Brush and Pen Tools Work Together

Using a pen, you can easily draw a straight line in Photoshop. To do this, you must first select the "Brush" tool, where using the right mouse button, a dialog box opens and the desired hardness, size and color of the future line are entered. Now you should activate the Pen tool in the quick access panel (in addition to the regular pen, there are other types of the Pen tool in the block, but we won’t need them). Place the first anchor point in the place where the beginning of the line should be. Then we put another point - the end of the line.

The Pen tool does not create a work object, but only a path. In order for the user to turn the path into a real object, he needs to stroke the path. The Paths panel is located by default in the lower right corner, where layers are usually located. In this window, select the "Contour" tab, where you can see our work contour. Right-click on the outline and select "Stroke Outline". In the Photoshop window that appears, the brush is in the box by default - you don’t need to change anything, just confirm the action.

25.01.2017 28.01.2018

Hello to all Photoshop lovers!

Drawing a straight line in Photoshop is not at all difficult, just move the mouse cursor, but, alas, this movement does not always turn out straight. In this lesson we will learn how to draw straight lines.

To make the line in Photoshop smooth, hold down the keyboard SHIFT and you will draw a straight line in Photoshop. This allows you to draw straight horizontal and vertical lines. You can also draw diagonally; to do this, click the left mouse button once on the area where the line begins, and a second time where it ends (with the SHIFT). This will draw a straight line at the given coordinates.

There are several ways to draw straight lines in Photoshop, giving them color, thickness and other styles. The following tools are commonly used: Brush, Pencil, Pen, Line, Rectangular Marquee. Which tool is best suited for the task is up to you to decide. Each method has its pros and cons.

Draw a straight line with the Brush Tool

The easiest way to draw a line is with a tool Brush (Brush Tool). Create a document in Photoshop (Ctrl + N) with an arbitrary size, I have this 800x600 pixels:

Activate the tool Brush (Brush Tool). Tool hotkey - B.

At the top settings panel change tools if necessary size And rigidity brushes:

We draw the line:

Somehow it’s not quite even, you’ll reasonably notice, right?

To draw a perfectly straight line, you need to hold down the key before starting to draw Shift, draw a line and release the key. This is how smooth the line turned out:

Keystroke method Shift before starting to draw a line, it helps to draw a strictly horizontal or vertical line at an angle of 90 degrees, but if you need to draw a line, for example, diagonally, you must first click the mouse button at the beginning of the line and hold down the key Shift, draw a line, then release the mouse button and Shift.

Draw a straight line using the Pencil Tool

Tool Pencil Tool is in the same tool group as the tool Brush, tool hotkey - B.

Drawing a line using the tool Pencil Tool similar to drawing Brush- click the mouse at the beginning of the line, hold down the key Shift and draw a line.

Draw a line with the Pen Tool

To draw a line with the tool Feather It will take a little longer than in previous cases.

Activate the tool Feather ( Pen Tool), tool hotkey - P.

Don't forget to make sure that the tool Feather is in mode "circuit". You can view this at top panel instrument settings:

Create a new layer, click on the create layer icon in layers panel:

Draw a straight line - just put two points. To draw a horizontal or vertical line, hold down the key again Shift:

To start drawing new line, hold down the key Ctrl and click on the canvas; if this is not done, the lines will be created continuously.

Draw arbitrary curved lines and hold down the key at the end Ctrl with a mouse click on the canvas to complete the lines.

The lines are ready, but, unfortunately, they are only visible in Photoshop in the tab Outlines (Window-Paths), if you save the image, for example, in jpg* format, the lines will not be displayed.

In order to make them visible, we return to the tool Brush, V top panel adjusting instrument settings size, brush hardness and if necessary, select the brush itself. We will need a round brush:

Choose a color:

Activate the tool Feather, right-click on the canvas and select “Stroke Path”:

The following window will open in which you need to select as the source "Brush", and a tick "Simulate pressure" (Simulate Pressure) It is advisable to remove it to get straight lines:

Result:

If you leave a checkmark “Simulate Pressure”, the lines will become thinner towards the ends:

Draw a line with the Line tool

One of the most common ways to draw a straight line in Photoshop is the Line. Located in the left panel:

The great thing is that you can easily adjust the color and thickness of the line:

With the clamped SHIFT I draw straight lines. They are created by the shape from vector tool. You can easily draw a vertical, horizontal and a straight line at a 45 degree angle.

Straight line using selection in Photoshop

It happens that you don’t want to bother with the settings of vector shapes and brushes. Therefore, you can simply select the desired area in Photoshop, for example, in the form of a line and fill it with color.

There is a Rectangular Marquee tool in Photoshop:

For example, we need a long and thick line in Photoshop. Select the desired area:

Choosing a tool Fill and set the color for the future line.

Fill the selected area with color and deselect it CTRL+D. We have a straight line.

Like these ones simple ways draw a line in photoshop. We hope you found this information useful! Good luck in your creativity and good mood!

In this tutorial I will show you how to create beautiful abstract lines, which will be useful in the design of your work. This tutorial is perfect for beginners.

This is what the final result looks like:

Step 1. Create a new document sized 800x800 px, fill the background with black. Create a new layer above the background one, press the P key to activate Pen Tool(Feather). Create a line as in the screenshot below:

If you can't draw the curve, that's okay. To do this, hold down the ALT key and drag the end of the curve to edit its shape:

Press B to activate Brush Tool(Brush), select a 1 px brush:

In the window Color Picker(Color selection) select the required color:

Activate again Pen Tool(Pen) (P), then right-click on the created curve and select Stroke Path(Outline Stroke):

Choose Brush(Brush) from the drop-down menu, make sure that the option Simulate Pressure(Simulate pressure) is active, and click OK:

And we get this beautiful curve:

Step 2. Using the process described above, we create three more lines. Make sure that:
- each line is on a separate layer;
- for the first line, the brush size is 2 px, the second - 3 px, the third - 4 px;
- reduce the opacity of the layers to 80%, 60% and 40%.

We adjust the location of the lines and get the following result (4 lines on 4 layers):

Step 3. Create a group "Lines" Layer - New - Group(Layer - New - Group) and move all 4 layers with lines into it. Duplicate the group once and merge the copy of the group into one layer (CTRL+E). Reduce the opacity of the new layer to 70% and move the lines lower and to the left to create the effect of depth:

Continue duplicating the layer to create more lines:

Now we need to add some color to the lines. To do this, use an adjustment layer Layer - New Adjustment Layer - Hue/Saturation(Layer - New Adjustment Layer - Hue/Saturation) for layers with lines (don't forget to create a clipping mask for the adjustment layer CTRL+ALT+G).

Choose any color you like:

We continue to add more colors. You can use Free Transform(Free Transform) (CTRL+T) to adjust the angle of the lines:

We also adjust the size of the lines:

Step 4. Now let's add some gray lines. To do this we go Image - Adjustments - Desaturate(Image - Adjustments - Desaturate) or SHIFT+CTRL+U to desaturate one of the layers:

Mixing the gray lines together with the rest:

And we get the following result:

Step 5. Almost finished. Now we combine the layers with the lines that we created into one (CTRL + E), then duplicate them, rotate them, change their position:

Let's add abstract dots around the lines to diversify the work. To do this, set up a brush as shown below (press F5 to bring up the brush parameters window).

Hello, dear readers! In this lesson you will learn how to draw a line in Photoshop
Create a new document in Photoshop (Ctrl + N) with a white background.

The simplest tool for drawing straight lines is the Line tool ( Line Tool) (U). In addition to standard modes vector tools On the top panel there is a parameter Thickness (Width). He is responsible for the thickness of the line.
To create a line, drag the mouse to the side while holding the left button. If you hold down the Shift key, you can get a horizontal or vertical line. If you drag a line along an angle while holding Shift, it will be inclined at an angle of 45 degrees.
This is how straight vector lines are drawn.

You can also use the Brush Tool (B) to draw lines. Select it, right-click on the canvas and set the Size to 1 pixel so that the lines are thin. As in the first case, you need to hold down the Shift key to draw straight lines.
You can also draw lines from points. Make a single click on the canvas at the starting point. Hold down the Shift key and click on the next point (where the end of the line should be), then on another one if you want to create a polyline.

But what if you need to draw a wavy line? To do this, you can use a combination of the Pen Tool (P) and the Brush Tool (B). Photoshop has a stroke feature.
Select the Pen Tool (P) and in the settings select the Paths mode:

With this tool, lines are drawn using single clicks. Draw a simple line in two clicks.

Hover your cursor over the line and a “+” sign will appear next to it.

Pull the line down and it will curve. Another anchor point will appear on the line. Using the Direct Selection Tool (A), you can change the curvature of the lines using the levers. To quickly switch to this tool, press the Ctrl key while the Pen Tool (P) is active.

Now you need to select a brush that will be used to outline the outline. Select the Brush Tool (B), set the size to 2 pixels and lower the Hardness to 0%.

Select the Pen Tool (P) again, right-click on the canvas and select Stroke Path.

In the window that appears, select Brush. If you turn on the Simulate Pressure function, the edges of the line will taper.

Press Enter to remove the outline.

The stroke could have been made more in a fast way. After setting up the brush, do not switch to the Pen Tool (P), but press Enter to stroke. Pressing this key multiple times will repeat the stroke. To remove the outline, press Delete.

This concludes the lesson. Now you know how to draw a line in Photoshop.