How to draw women's jeans. How to draw clothes with a pencil step by step

Jeans are such a versatile item that can be worn until the fabric begins to fray. If they are rubbed in different places, the girls clap their hands, pick up scissors and make a “flaw” out of the jeans, for which, if you buy new jeans, you will have to pay a decent amount. We will leave this work for another occasion, and we ourselves will try to give the boring jeans new life, we will draw, especially since art does not require any special drawing skills.

You can create your own drawings using fabric markers or paints with a stencil. Very easy way instead of using a stencil, use the remnants of regular old lace, or...vegetables. Let's follow these two lessons step by step.

Necessary materials for work:

- Old jeans (preferably white or light)

- Felt pens for fabrics of different colors

- Scissors

- Cardboard

- Lace

Let's start creating:

Jeans with a similar pattern should wash only in cold water , and also do not dry them in a machine. Fabric markers are wash-resistant, so if you use regular paper markers, they may damage the fabric after washing.

1) Get started With bottom edge . Insert the cardboard into the leg to prevent the design from imprinting on the other side.

1.

2) Place the lace on top; you can secure it to the pant leg with pins. Think overwhat colors will you use.

2.

3) Draw a picturedotted through lace along the contours

3.

5) After completing the drawing,remove the lace, you should end up with something like this:

4.

6) You can combine several colors. Thus applydrawings along the entire length of the jeansand on the reverse side.

5.

The drawing is ready!

6.

Another easy way to apply a pattern to jeans isusing a stenciland liquid paint for fabric.

7.

What is required for work:

- Old jeans

- Fabric paint

- Stencil in the shape of a flower (if you haven’t found a stencil, you can original drawing create using vegetables, such as cabbage. Cut out the required pieces from it and dip them in paint and apply them to the tan).

- Scotch

- Brush

- Sponge

8.

Let's get started:

1) Attach the stencil to the jeans using tape.

9.

2) Using spongesapply paint.

10.

3) Paint may be applied unevenly, e.g.in some places more intense, then the effect will be very original.

11.

4) Draw a picturein different places of jeansat both sides. At the end you can make a small stroke with a brush: drawleaves.

12.

5) The drawing is ready. Let it dry well and you can put it onupdated jeans!

www.infoniac.ru/news/Starye-dzhinsy-novaya-zhizn.html

Cloth - important element our life with you. After all, in cultural society It is not customary to walk around with your body uncovered. That's why they exist different types one kind of clothing or another. Clothing appeared at the dawn of humanity. Ancient people covered their bodies with animal skins and bird feathers. As spinning and weaving developed, fabric appeared, from which simple shirts, trousers, and dresses began to be sewn. They were undecorated, but very practical and comfortable.

As the human society clothes, especially for the rich, were decorated with stones, gold, and silver. And for the poor it remained just as simple. Epochs changed, people changed, and clothes changed. Now in modern world many people wear simple, comfortable, functional clothes on weekdays, and for evening events or holidays wear smarter and more beautiful clothes.

Women love dresses and skirts, men wear suits, and both sexes enjoy wearing very comfortable jeans. We draw several items of clothing step by step in this lesson.

Stage 1. Long dress. Draw two lines - the boundaries of our dress. One is straighter, the other has a curve, indicating the waist. We outline the contours of the dress along these lines. This is the neckline, two straps on the shoulders, the waistline, hips and hem of the dress. Then add straps at the back and make a cutout at the bottom of the side. All over the dress we draw waves showing the drapery. We make several such lines. We color the dress, not forgetting about the play of color.

Stage 2. Women's pants. Make two lines on the sides and one stroke on top. At the top we denote the circumference - the waist. From there we draw the sides of the trousers: the hips, below we form the line of the knees and flare the trousers downwards. Show the folds below. Let's add fabric wavy lines, which will then show us the light and shadow areas on the fabric. The result was beautifully drawn beautiful women's trousers.

Stage 3. Coat. Draw two perpendicular straight lines, with another straight line on top. And on the sides there are two lines from the shoulders to the waist and from the waist to the hips. This is how we limited the contours of our drawing. then we draw one side (side) of the coat. Then the other side. We make a collar. We draw the sleeves. Below the fastener we show the hem flap. Let's outline all the lines of the drawing well and color it at the end.

Stage 4. Jacket. We will draw one vertical line in the middle and cross it with two straight lines, from which we will make another line of sleeves. You also need to show two features - the width of the jacket. We begin to draw the sides of the jacket (sides). We keep the display natural and draw folds on the fabric. Let's show the collar and two sleeves.

Stage 5. Jacket. (Continuation). Let's design the collar and clasp. Then we will finish the sides (sides) and sleeves from the shoulders to the bottom. Let's shade some places on the jacket. Then we'll color everything.

Stage 6. Boots. Draw one straight line and one uneven line. Upper part We draw the top of the boot with a line, from it we draw the front and back sides of the boot and make a transition to the heel. Then we draw the front part - the noses. Shading. Let's color it.

Accustom your hands to the program Adobe Illustrator It's not so easy at first, especially if you're used to working in programs like Photoshop. The difference between using layers and creating objects and shapes may seem strange to you.

In this tutorial we will learn how to create jeans in Adobe Illustrator. Let's learn a few important techniques. And we will use gradients, effects and add strokes in the palette Appearance(Appearance panel). So, let's begin!

Final result

These are the jeans we will create in this tutorial.

How to Draw Vector Jeans in Illustrator

Step 1

Create an RGB document, 600 x 600 pixels.

Step 2

2.1 First, select the Pen Tool and use it to create an object as shown below. Continue drawing black and red objects.

2.2 Select the white object and open the menu Object/Path/Create parallel path. In the window that opens, in the Offset field, set -5 pixels and click OK.

Select the black object and do the same as with the previous object.

2.3 Fill the black and white objects with black (70%) color and add a 1 pixel thick stroke (color 70% black).

2.4 Select the object as shown below. Open the Effect/Texture/Texturizer menu. Set the details as in the picture below and click OK.

2.5 Select a white object and fill it with R=7, G=10, B=34 (no stroke).

2.6 Without deselecting it, open the menu Effect/Texture/Texturizer. Enter the data as shown in the figure and click OK.

2.7 Do the same with right side jeans.

2.8 Select the Pen Tool and create a yellow object as shown in the image below.

Fill it with R=7, G=10, B=34 (no stroke)

Without removing the selection, open the menu Effect/Texture/Texturizer. Enter the data as shown below and click OK.

2.9 Select the Pen tool again and create a yellow object as shown below.

Fill the created object with the color R=35, G=31, B=32 and set the stroke to 1 pixel thick (color - R=109, G=110, B=113). In the Variable Width Profile, in the Context Bar, select Width Profile 2.

Send the object to back (Ctrl + Shift + Open Square Bracket).

Step 3

3.1 Create yellow objects with the Pen Tool as shown in the figure.

3.2 Fill them with a linear gradient.

3.3 Create a copy (Ctrl+C, Ctrl+F) of the selected object as shown below. Without removing the selection, open the Window/Appearance menu (Appearance, Shift + F6). In the Appearance palette, set Fill = No Fill. Add a new stroke by clicking the button at the bottom of the palette. Give it a thickness of 5 pixels and a color of R=35, G=31, B=32. And click the Add New Stroke button again. For the new stroke, set the Weight to 3px and set the Color to R=109, G=110, B=113. Add another stroke. Set the thickness to 2 pixels and the color to R=230, G=231, B=232.

Keeping the selection still selected, return to the Appearance panel and select a 2 px thick stroke. And in the Width Profile, set it to Profile 2.

Select the anchor points highlighted yellow, and click the Cut path using selected anchor points button on the Context panel. And then delete two objects as shown in the second picture.

Copy (Ctrl+C, Ctrl+F) the selected object once and drag the copy to a new location as shown in the first image below. Then select both objects as shown in the second image and press several times (Ctrl + Open Square Bracket) to move them behind the light object.

3.4 Select the light object as shown in the first image below and open the menu Object/Path/Create Offset Path. In the window that opens, set the Offset to -2 pixels and click OK. Without deselecting the object, open the Window/Stroke menu (Ctrl + F10) and set the data as shown in the second picture.

3.5 Select the four anchor points highlighted in yellow and click the Cut path using selected anchor points button on the Context panel. Then delete the two selected objects as shown in the second picture.

3.6 Copy (Ctrl+C, Ctrl+F) the selected object and drag the copy to a new location as shown below.

3.7 Copy (Ctrl+C, Ctrl+F) the selected object as shown below. With the selection still selected, select the Eyedropper Tool and click on the object where the yellow arrow is pointing. Then select the two anchor points indicated in yellow. And click the Cut path by anchor points button on the Context panel.

Delete the selected object indicated by the red arrow. Then select what's left and move it back (Ctrl + Open Square Bracket).

Copy (Ctrl+C, Ctrl+F) the light object as shown below. Without removing the selection, open the menu Object/Path/Create Offset Path. In the window that opens, set the Offset to -2 pixels and click OK. Then select the Eyedropper tool and click on the selected object where the yellow arrow is pointing. Delete the object pointed to by the red arrow (do the same as in step 3.5).

Do the same for the other two light objects. In the end, you should end up looking something like the picture below.

3.8 Copy (Ctrl+C, Ctrl+F) the two selected objects as shown in the figure below. Select the Eyedropper tool and click the object where the yellow arrow is pointing. And move the two resulting copies a few pixels up.

3.9 Using the Pen ( Pen tool) create an object as shown in the first picture. Fill it with black. And then copy once (Ctrl+C, Ctrl+F). Set the copy to “no fill” and add a 1 px thick stroke (color white). Select the Text Along Path tool (Font: Madiad pro, Style: Regular, Size: 5px, Color: R=96, G=57, B=19) and click on the white stroke. Then press the L key to make it look like the last picture. Select and group (Ctrl+G) all the objects created in this step.

3.10 Select the Ellipse tool and create two objects as shown in the figure. Fill the large ellipse with black. And a small radial gradient.

3.11 Create an object as shown in the first image and fill it with 90% black (no stroke). Then create another object like in the third image and also fill it with 90% black (no stroke). Reduce the Opacity to 80% and move it back behind the small ellipse (Ctrl + Open Square Bracket).

3.12 Create another object as shown in the first picture and fill it with white. Set the opacity to 80% and move it back behind the small ellipse. With it still selected, open the menu Effect/Blur/Gaussian Blur. In the window that opens, set the Radius to 3.1 pixels and click OK. Select and group all the objects created in this and the previous step.

3.13 Drag the grouped object onto the one created earlier as shown below. And then select and group (Ctrl+G) both groups.

3.14 Drag the grouped objects onto the jeans as shown in the image below.

Step 4

4.1 Using the Pen tool, create an object as shown in the figure.

4.2 Fill it with R=18, G=26, B=51 and add a 2 px thick stroke (color: R=109, G=110, B=113).

4.3 Without deselecting it, open the menu Effect/Texture/Texturizer. Set the data as shown in the figure and click OK. Set the Opacity to 40%.

4.4 Copy the created object (Ctrl+C, Ctrl+F). Select the Add Anchor Point tool and add two (where the yellow circles are in the picture). Then delete the anchor points indicated by the red circles. Continue working with the Add Anchor Point tool. Add some points and drag them like in the third picture.

4.5 With the object still selected, open the Effect/Texture/Texturizer menu. Enter the data as shown in the figure and click OK.

4.6 Copy (Ctrl+C, Ctrl+F) the selected object as shown in the figure. With it still selected, open the Window/Appearance menu. And set the parameters as in the picture.

4.7 With the object still selected, select the Direct Selection Tool and, while holding down the Shift key, click on the four anchor points indicated by the red circles. Then click the Cut path using anchor points button on the Context toolbar. Then delete the two selected objects as shown in the second picture.

4.8 Select the bottom outline from what is left. Open the Effect/Stylize/Shadow menu. Enter the details as shown below and click OK. And set the Opacity to 40%.

4.9 Select the top path and copy (Ctrl+C, Ctrl+F) it once. With the selection still selected, press the down arrow key five times and set the options as shown below.

4.10 Select the Pen tool and create an object as shown in the first picture. Fill it with R=7, G=10, B=34 and add a 2 px thick stroke (color: R=128, G=130, B=133).

4.11 Without deselecting it, open the menu Effect/Texture/Texturizer. Set the details as shown below and click OK. Send the object to back (Ctrl + Shift + Open Square Bracket).

4.12 Select the Pen tool and create an object as shown below. Fill it with a linear gradient. Do the same thing and create more of these objects. And place them as shown in the second picture. Select and group (Ctrl + G) all the objects created in this step. Set their Opacity to 10%.

4.13 Do the same for the right side of the jeans. In the end, your drawing should look something like this.

Step 5

5.1 Select the Pen tool and draw an object as shown in the image below. Fill it with R=167, G=169, B=172 (no stroke).

5.2 Continue working with the Pen tool. Create another object as shown in the first picture. Fill this object with black (no stroke) and move it back (Ctrl + Open Square Bracket, behind the object created in the previous step. Set its Opacity to 90%.

5.3 Copy (Ctrl+C, Ctrl+F) the object created in step 5.1. With the selection still selected, press the Right Arrow key twice, then the Up Arrow key twice. Fill this object with the color R=0, G=0, B=51 (no stroke). Open the Effect/Texture/Texturizer menu. Set the data as shown in the second picture and click OK.

5.4 Without removing the selection, open the menu Object/Path/Create Offset Path. In the window that opens, set the Offset to -2 pixels and click OK.

5.5 Do not fill the created object with color. Add only a 1 pixel thick stroke (color: R=167, G=169, B=172). Open the Window/Stroke menu (Ctrl+F10). In the Stroke palette, check the box next to the Dashed Line command. And in the Stroke and Space fields, set each to 2 pixels.

5.6 Create some more objects. And do the same with them as in the previous paragraphs. In the end, your drawing should look something like the picture below.

Step 6

6.1 Select the Pen tool and create two objects as shown in the image below.

6.2 They should be in a sublayer behind the objects created in Step 3.

6.3 Fill them with R=0, G=0, B=31 (no stroke).

6.4 With them still selected, open the menu Effect/Blur/Gaussian Blur. In the window that opens, set the Radius to 100 pixels and click OK.

6.5 As a result of applying the effect, unwanted blur appears at the bottom (see picture below). We'll fix it.

6.6 Select the objects created in step 6.4 and pin them (Ctrl + 2). Then select the two objects as shown in the first image below and copy them once (Ctrl+C, Ctrl+F). While still selected, click the Unite button in the Pathfinder palette. Then press (Ctrl + Shift + Close Square Bracket) to move the created object to the front.

Open the menu Object/Release All (Ctrl + Shift + 2). Then select the newly freed objects and the group created in step 6.6. And then open the menu Object / Clipping Mask / Create (Ctrl + 7).

Without deselecting it, press (Ctrl + Close Square Bracket) several times until it looks like the image below.

Step 7

7.1 Using the Pen tool, create objects as shown in the pictures below.

7.2 Select the two purple objects, open the menu Object/Path/Create Offset Path. In the window that opens, set the Offset to -10 pixels and click OK.

7.3 Select the anchor points indicated by the yellow circle and drag them to a new location.

7.4 Copy (Ctrl+C, Ctrl+F) the newly created object once and press (Ctrl + 2) to pin the copy. Select the object created in step 7.3 and fill it with a radial gradient.

7.5. Without deselecting it, open the menu Effect/Texture/Texturizer. Enter the data as shown in the figure and click OK.

7.6. Open the menu Object/Release All (Ctrl + Shift + 2). Shift-click the magenta object that is larger and click the Minus Front button in the Pathfinder palette. Without removing the selection, open the menu Object/Path/Create Offset Path. In the window that opens, set the Offset to -2 pixels and click OK.

7.7. Select the larger purple object and go to Effect/Texture/Texturizer. Set the data as shown in the first picture below and click OK. Then open the Effect/Texture/Underpainting menu. Enter the data as shown in the second picture. And click OK.

7.8 Select the smaller purple object and add a 1 px stroke (color: R=188, G=190, B=192). Then open the Window/Stroke menu (Ctrl + F10). In the Stroke palette, check the box next to Dashed Line. And enter 2 pixels each in the Stroke and Space field.

7.9 Select and copy (Ctrl+C, Ctrl+F) the object created in step 7.5. With the object still selected, go to the Appearance panel and delete all effects applied to this object. And set the data as in the picture below.

7.10 Select the anchor points indicated by red circles and click the “Cut path using anchor points” button on the Context panel. Then delete the object that the red arrow points to.

7.11 Do the same with the objects on the left side. In the end, your drawing should look something like the image below.

7.12 Create a red object as shown in the figure. And fill it with color: R=0, G=0, B=28 (no stroke).

7.13 Without deselecting it, open the menu Effect/Texture/Texturizer. Set the data as shown in the first picture and click OK. Open the Effect/Texture/Underpainting menu again. Enter the information as shown in the second picture and click OK.

7.14 Draw four straight lines, open the Stroke palette and enter the data as shown below.

7.15 Draw the object as shown in the picture and fill it with color R=82, G=2, B=10 (no stroke).

7.16 Select the Text tool and make some inscription.

7.17 Draw two straight yellow lines as in the first picture. Open the Stroke palette and set the data as shown below.

Your drawing should now look something like the one below.

7.18 Select the red objects and fill them with a linear gradient (no stroke).

7.19 Select one of the four objects. Open the Effect/Texture/Texturizer menu. Enter the data as in the figure below and click OK.

While still selected, open the Effect/Texture/Underpainting menu. Enter the data as shown in the figure below.

7.20 Do the same with the remaining objects.

7.21 Select the Pen tool and draw two red lines as shown below.

Draw six more red lines as shown in the picture.

Select all the red lines you drew and change their color to R=188, G=190, B=192. Open the Stroke palette, check the box next to the Dashed Line command and enter 2 pixels in the Stroke and Space fields.

7.22 Fill the two yellow objects with R=0, B=0, G=36 and add a 1 px Stroke (color: R=35, G=31, B=32).

7.23 Without removing the selection, open the menu Effect/Texture/Texturizer. Enter the data as shown in the figure and click OK.

While still selected, open the Effect/Texture/Underpainting menu. Enter the data as shown in the figure.

7.24 Do the same for the yellow object on the right. In the end, your drawing should look something like this (see below).

7.25 Draw two yellow lines as shown below.

7.26 Select both lines you just drew, turn off the fill and add a one pixel thick Stroke (color: R=188, G=190, B=192). Then open the Stroke palette, check the box next to the Dashed Line command and set the Stroke and Space to 2 pixels each.

7.27 Do the same for the right side of the jeans.

7.28 Select the Pen tool and draw a quadrilateral as shown in the first image. Fill it with R=0, G=0, B=36 and add a 1 px thick Stroke (color: R=35, G=31, B=32).

7.29 Without deselecting it, open the menu Effect/Texture/Texturizer. Enter the information as in the figure below and click OK. While still selected, open the Effect/Texture/Underpainting menu. Enter the information as in the figure below and click OK.

7.30 Do the same for the right side of the jeans.

7.31 Draw two yellow lines with the Pen. Turn off the fill and add a 1 pixel thick Stroke (color: R=188, G=190, B=192). Open the Stroke palette, check the box next to the Dashed Line command and in the Stroke and Space fields set 2 pixels each.

7.32 We do the same for the right side of the jeans.

Step 8

8.1 Now let’s draw a lightning bolt on the pocket. Such as in the picture below.

8.2 First, with the Pen tool, draw a yellow rectangle as shown in the first picture. And unfold it as in the second picture.

8.3 Fill the rectangle with the color R=0, G=0, B=36 and add a 1 px thick Stroke (color: R=35, G=31, B=32). Set the opacity to 50%.

8.4 Without deselecting it, open the menu Effect/Texture/Texturizer. Set the data as shown in the first image below and click OK. While still selected, open the Effect/Texture/Underpainting menu. Set the data as shown in the second image below and click OK.

8.5 Using the Pen Tool (P), draw a yellow rectangle as shown in the first picture below. Then open the Appearance panel and set the data as shown in the second picture.

8.6 Select the Rounded Rectangle tool Rectangle Tool) and create a rectangle like in the first picture. Then select the Ellipse tool and create a 3.5 px by 1.5 px object. Place the created ones as shown in the second picture. Select both objects and click the Unite button in the Pathfinder palette. Fill the resulting object with a linear gradient. Copy this newly created object several times (Ctrl+C, Ctrl+F) and place the copies as in the last picture (see below).

8.7 Select and group (Ctrl+G) all the objects created in step 8.6. Then double click the tool Mirror reflection on the Tools palette. In the window that opens, select Horizontal and click Copy. Place the reflection as shown in the second image. Fill it with a linear gradient.

8.8 Draw a yellow object with the Pen and fill it with a linear gradient. Copy (Ctrl+C, Ctrl+F) it once. Press the Right arrow key twice and the Up arrow key twice. And fill the newly created object with a linear gradient as shown in the third image (see below).

8.9 Copy (Ctrl+C, Ctrl+F) the newly created object once and press (Ctrl + 3) to hide the copy. Select both objects created in step 8.8, open the menu Object/Blend/Transition Options. Enter the details as shown in the first image below and click OK. Open the Object/Blend/Make menu again (Ctrl+Alt+B). Press (Ctrl + Alt + 3) to make the object hidden in the previous paragraph appear. Fill it with a linear gradient. Copy (Ctrl+C, Ctrl+F) once and fill the copy with a linear gradient as shown in the third picture

8.10 Using the tool, create a 12 px by 3 px rectangle. Then go to Effect/Stylize/Rounded Corners. In the window that opens, enter Radius - 1 pixel and click OK.

8.11 Fill the newly created object with a linear gradient. Then copy (Ctrl+C, Ctrl+F) the object once. For the copy, turn off the fill and add a 1 pixel stroke (color: R=88, G=89, B=91). Then press once (Ctrl + Open Square Bracket) to move it back.

8.12 Select the object that you just filled in the previous step and copy it once (Ctrl+C, Ctrl+F). With the selection still selected, press the Up Arrow key three times and the Left Arrow key four times. Fill the newly created object with a linear gradient as shown in the second image below.

8.13 Select both objects you just filled. Go to Object/Blend/Blend Options. Enter the details as shown below and click OK. Then open the menu Object/Blend/Make (Ctrl + Alt + B).

8.14 Using the tool, create a 10 x 15 px Rectangle. Select the top left anchor point and press the Right Arrow key three times. Select the top right anchor point and press the Left Arrow key three times. Switch to the Add Anchor Point Tool (+) and click in the two places indicated by the red circles. Then select the two anchor points indicated by green circles and click the “Convert selected anchor points to smooth” button on the Context panel. As a result, your new object should look like in the fifth picture.

8.15 Using the tool, create an Ellipse and position it as shown in the first picture. Select both of the newly created objects and click the Unite button in the Pathfinder palette. Without removing the selection, open the menu Object/Path/Create Offset Path. In the window that opens, set the Offset to -2 pixels and click OK. In the created object, select the four anchor points, indicated by yellow circles, and click the “Cut contour using selected anchor points” button on the Context panel. Then delete the two selected objects as shown in the image below.

8.16 Select the two anchor points, indicated by yellow circles, and click the “Connect selected endpoints” button on the Context panel. Then select the two anchor points indicated by the green circles and click the Connect Selected Endpoints button. Select all red objects and click the Exclude button in the Pathfinder palette. Fill the newly created object with a linear gradient and copy it once (Ctrl+C, Ctrl+F). With the selection still selected, press the Right Arrow key once and the Down Arrow key once. Then change the color to R=109, G=110, B=113 and move it back (Ctrl + Open Bracket). Select and group (Ctrl + G) all objects created starting from step 8.14.

8.17 Place the created object as shown in the first picture. Then select the object created in step 8.13 and move it to foreground(Ctrl + Shift + Closing square bracket).

8.18 Using the Pen Tool, create a red object. Then - yellow. And place it as shown in the second picture.

Fill the new objects with a linear gradient as shown below

8.19 Select and group (Ctrl + G) all objects created starting from point 8.2. Rotate the grouped object at an angle of approximately -20 degrees and position it as shown in the first image. With it still selected, double-click on the Tools palette and select the Mirror Tool. In the window that opens, select Vertical and click Copy. Place the object as shown in the second picture.

8.20 Unfold the fasteners as shown in the picture below.

Step 9

9.1 Create a 15 x 15 px object and fill it with R=35, G=31, B=32. Copy it once (Ctrl+C, Ctrl+F), make the copy a little smaller and fill it with color R=147, G=149, B=152. Copy the created object (Ctrl+C, Ctrl+F) twice. Create a new ellipse and fill it with the color R=209, G=211, B=212. Position it as shown in the third picture. Select the two objects as shown in the third image and click the Intersect button in the Pathfinder palette. Create a new ellipse as shown in the fifth image and fill it with the color R=209, G=211, B=212. Select two objects as shown in the fifth picture and click the Intersect button.

9.2 Select both objects you just created and go to Effect/Blur/Gaussian Blur. In the window that opens, set the Radius to 3 pixels and click OK. Select all objects created starting from step 9.1 and group them (Ctrl + G).

9.3 From the newly grouped object, create two new objects as shown below.

9.4 Place the created objects as shown in the figure.

Step 10

10.1 Select Pen and create an object as shown in the first image below. Fill it with a linear gradient. Set the opacity to 5%.

10.2 Create more objects as shown in the figure. Then fill them, as in the previous step, with a linear gradient. Set the opacity to 5%.

As a result, you should end up with a drawing that looks something like this.

The finished drawing is below. I hope you enjoyed my lesson.

Final drawing:

Do you have any questions or something to add on the topic of the article?

This is another lesson in which I will teach complex things about simple subjects. These are things that make beginners ask the question in bewilderment - How is it so easy, but I can’t do it? And in order to find out the answer, you came to us on DayFan, and you will receive it. Below there will be instructions on how to draw sneakers, and a few more thoughts on this topic. These are shoes for fashionable, informal individuals. Or from the manufacturer’s point of view - the opportunity to sell it at exorbitant prices cheap material, because they are made from ordinary rags sewn to vulcanized rubber. But having done beautiful inscription, supposedly fashion design and show them by , you can add a few zeros to the price on the right, people grab it. But sneakers are not the same as sneakers. No, crosses are different. Crosses are intended for running and playing sports, and sneakers are long, like skis, foot covers worn by representatives modern subcultures, type of geeks. Usually these individuals are dressed in jeans called pipes. Here comes this miracle with ski-like feet and thin legs (but thin only below the knee). I always smile when I see such individuals. But this is fashion, and nothing can be done. You, too, can come up with fashionable sneakers for yourself, and then force everyone to wear them. It's not difficult to become a designer these days. Try practicing with my example, here:

How to draw sneakers with a pencil step by step

Step one. Let's sketch a sketch of future boots. It's not difficult to do this. Repeat after me:
Step two. Let's add laces and holes for them to the sketch.
Step three. Let's make vertical strokes to give them realism.
Step four. Now let's carefully erase auxiliary lines, then we will correct the contours. Here is the result, wear it for your health:
We still have a lot of lessons on drawing clothes, for example, try to draw.

You will need

• - jeans;
• - sketch of the drawing;
• - carbon paper for fabric;
• - fabric marker;
• - contour;
• - acrylic paints;
• - brushes;
• - foam sponge;
• - iron.

Instructions

Paint the drawing inside the outline. Let it dry completely. Check the instructions to see if your paint needs ironing. If so, iron the fabric before further use.

Any modern fashion lover is familiar with jeans. These thick cotton trousers are very comfortable and practical, so they are popular among men and women of any age. A few centuries ago, Italian sailors wore similar trousers made of thick canvas. But the inventor of modern jeans is the American industrialist Levi Strauss.

From the history of jeans

Fashion historians have established that Italian sailors were the first to wear clothes made from canvas. This material was very common, cost, and products made from it were resistant to wear. Subsequently, such trousers were called “genes”. It is believed that this is from the name of the city of Genoa, located in Italy and famous for its canvas.

IN late XVIII century in France, a book was published with samples of textile products, which contained descriptions of pants that looked like jeans.

IN mid-19th century, the Belgian Leiba Strauss arrived in America, whom the sailors immediately dubbed Levi Strauss (this name sounds like Levi Strauss). The son of a poor man, he had very little property with him, including a substantial roll of canvas material, from which, upon arrival on American soil, he began to sew tents according to the orders of gold miners in order to somehow feed himself.

One day, an acquaintance complained to Strauss that if he had good pants, he could do without a tent, just sleeping under a tree. The enterprising Strauss recalled the tailoring skills passed on to him by his father, and very soon he sewed good-quality pants from canvas, which he immediately sold to a gold miner for just over a little.

The product was a success, so Strauss soon had new customers.

Jeans: simplicity, comfort and practicality

In 1853, a successful tailor founded his own workshop in San Francisco, where he began sewing pants for gold miners and other workers. Strauss personally visited gold mining villages, finding out the wishes of future clients and improving his products. The workers were pleased with the way Strauss carried out orders.

Soon the trousers were equipped with belt loops, as well as spacious front and back pockets. For greater strength, Strauss made all seams double. A few years later, the seam joints on the pockets were reinforced with metal rivets. Patented in 1873 the new kind work clothes, Strauss began to select more suitable material for your products. The choice fell on thick cotton fabric with a diagonal weave. This is how modern jeans were born.

As the number of people heading to the gold mines decreased, jeans became popular among the wider population, becoming everyday wear for the most ordinary people. Interestingly, during the Second World War, practical and durable jeans began to be used in the United States. They were worn by those who directly participated in the hostilities.

Video on the topic