What colors does yellow consist of? How to get blue

“We touched on the basic principles of drawing - what you need to do to draw approximately what you want. And they did this using the example of pencil and paper. Why? Because it is easier than learning how to paint with paints, since in the case of using paints in addition to the problem " How should I draw this? the problem “” appears - so that what comes out is very similar to what was intended. And in this article we will try to give an accurate answer to this question.

How to get desired color? There are two ways. The first is traditional, using the well-known color wheel:

So, there are primary colors:

• yellow
  
• blue
  
• red .

Which when mixed give

• orange
  
• green
  
• violet
  
• brown .

Moreover, the shades of mixed colors depend on the proportion of primary colors. And, using the color wheel, you can get the desired color like this:

1. Take a certain amount of the main color (for example, blue )
2. Add some second primary color (for example, yellow )
3. Compare the result green with what you wanted to get
4. Add one or another primary color to correct the shade.
5. Or simply take the desired shade of green from a tube jar.

Why does the last point arise - take the desired shade from the jar? Because getting the desired color by mixing the main ones sometimes happens difficult.

In principle, for starters, you can get the desired color using such a color wheel. However, as skill increases, the need for more precise color selection increases. Indeed, with the help of the described principles, it often turns out dirt. For example, it is very difficult to get a good violet color by mixing red And blue. Or is it difficult to get necessary shades green , orange, brown flowers. That is, the principles do not take into account any factors that affect the result when mixing colors.

We are happy to tell you that these factors really exist, and, moreover, with their help you can cope with the problem of “dirt” and still learn how to get the right colors not by intuitive mixing, but by ordinary simple sequence of actions. This sequence and the reasons for the “dirtyness” of the standard color wheel were discovered not by us, but by Michael Wilcox. Who wrote the book " . How to get the color you really need". By the way, you can download this book by Michael Wilcox from the link Blue and yellow do not make green.

Naturally, it will not be possible to present all the material in the book in one article, so we will limit ourselves to the main points, and we recommend that you get the details from this very book by Michael Wilcox, “Blue and Yellow Don’t Make Green.”

So, how to reliably and accurately get the very desired color?

To do this, it is necessary to take into account an important theoretical point. Why do we see color? Because different objects (including paint pigment) have different surface, which reflects light differently from the sun or other light source. That is, the surface, for example, of a bathtub, has such a structure that it reflects all colors and absorbs nothing. And all the colors of the rainbow, as we know, form white. Accordingly, the bathtub appears white. On the other hand, the surface of soot has such a structure that it absorbs all the light falling on it. And soot doesn't reflect anything. As a result, we see black soot.

What happens if you mix white and soot? It will turn out beautiful grey color. Why? Because light is reflected from pieces of white completely, as white. And then it is partially absorbed by soot particles. The more soot in the white, the darker the gray it turns out - due to the fact that more and more white light reflected by the white particles is absorbed by the soot particles.

The exact same principle works for color pigments. Thus, red paint is red because it primarily reflects red color. Blue color looks blue, since the pigment in its composition absorbs all colors except blue. It “works” exactly the same way yellow color - the pigment absorbs most colors except yellow.

Next, we move on to mixing colors. So, for example, you take blue paint and red paint. Mix them and get dirt. Why? Because the reflected color is red ABSORBED blue pigment in the same way as all the falling color. Accordingly, the red pigment absorbs all the radiation is blue - because the nature of its surface is designed so that predominantly red pigment is reflected.

But you may ask: “What nonsense, because mixing blue And yellow we still get green, and according to your theory, it should also turn out to be dirt?” Well, if truly pure colors existed in nature, then we would see the formation of dirt. But there is one thing But, which makes it possible not only to mix colors, but also to carefully and reliably select the truly desired shade of color.

So, the pigment reflects more than just light. Light of the same wavelength is reflected in greater least. Thus, the red pigment mainly reflects red color. But nevertheless, all other colors are also reflected (for example, violet or orange). Exactly the same can be said about yellow color - the pigment predominantly reflects yellow, but nevertheless it can be reflected in sufficiently large quantities orange or green. WITH blue same thing - it can carry additional “harmonics” green or purple .

So there is Not three primary colors. Eat six primary colors:

1. Mainly reflective paint red and to a lesser but significant extent orange .
2. Paint that mainly reflects red and to a lesser (but significant) extent violet .
3. A pigment that primarily reflects yellow and in addition green .
4. A pigment that primarily reflects yellow and plus an additive orange .
5. Mainly reflective material blue and partially violet .
6. Material that reflects predominantly blue and partially green .

Well, have you already understood the principle of color formation?

It's very simple: you take yellow from point 3 and blue from point 6, mix these colors. Blue pigment neutralizes yellow, yellow pigment absorbs blue. What color remains? Right, green! And not just green, but beautiful, bright and juicy green.

In the same way: by mixing blue from point 5 and red from point 2, you neutralize the blue and red colors, and a rich and rich color appears violet color.

And finally: by mixing yellow 4 and red 1, you get orange due to the fact that the red pigment will absorb radiation from the yellow pigment, and yellow will absorb the reflected radiation from the red pigment.

The result was NEW color wheel of six primary colors:

The colors have arrows that indicate the path for optimal manifestation of the “mixed” color. Respectively, variety of shades is born as a result of one or another combination of these SIX primary colors. “Wrong” combinations (for example, blue 6 and red 1) produce dull shades of colors (for example, dirty purple). The combination of one “correct” color and one “wrong” color (for example, blue 6 and red 2) produces more pronounced shades (for example, a brighter purple). And finally, the combination of the “right” dyes (for example, blue 5 and red 2) produces a pure and bright color (bright and beautiful purple).

Naturally, reading the article is not enough to master getting the desired color. It is best to read the book " Blue and yellow do not give green» by Michael Wilcox plus do the practical color matching exercises described in the book. But nevertheless, the answer to our question has been received.

Every person who has ever held a brush and paint in his hand knows that you can get a lot of shades from two or three colors. The rules for mixing and matching colors are determined by the science of coloristics. Its basis is the color wheel known to many. There are only three primary colors: red, blue and yellow. Other shades are obtained by mixing and are called secondary shades.

What colors of paint should be mixed to get brown?

Brown is considered complex; when creating it, you can use all the primary colors. There are several ways to get brown:

• Classic: green + red in proportions 50:50.
• The main trio: blue + yellow + red in equal quantities.
• Mixing: blue + orange or gray + orange. You can vary the intensity of the hue by adding less or more gray.
• Optional: green + purple + orange. This shade has a pleasant red or red tint. You can also mix yellow + purple - the color will have a yellowish tint.

What colors of paint need to be mixed to get purple?

The easiest way to get purple is to mix equal proportions of red and blue. True, the shade will turn out a bit dirty, and it will need to be adjusted.

To make the tone cooler, take 2 parts blue and 1 part red and vice versa.

To achieve lavender and lilac, the resulting dirty purple needs to be diluted with white. The more white, the lighter and softer the shade will be.

Dark purple can be obtained by gradually adding black or green to the original color.

What colors of paint need to be mixed to get red?

Red is considered a base color and is present in any artistic palette. However, you can get red by mixing violet (magenta) and yellow in a 1:1 ratio. You can also mix a carmine shade with yellow to create a more intense red. You can make it lighter by adding more yellow and vice versa. Shades of red can be obtained by adding orange, pink, yellow, white.

What colors of paint should be mixed to get beige?

Beige is a neutral and independent color; it has many shades, which can be achieved by varying the amount of white and yellow shades added.

Most easy way get beige - mix brown and white.

To make the color more contrasting, you can add a little yellow.

Flesh beige can be obtained by mixing scarlet, blue, yellow and white. Hue " ivory"is created by mixing golden ocher and white paint.

Green color can be achieved by mixing yellow and blue in equal parts. The result will be a grassy green hue. If you add white color to it, the mixture will lighten. By mixing brown or black pigment, you can achieve emerald, marsh, olive, dark green shades.

What colors of paint need to be mixed to get gray?

The classic tandem for getting gray is black + white. The more white, the lighter the finished shade.

• You can also mix red, green and white. The color will have a slight yellow tint.
• A blue-gray shade can be created by mixing orange with blue and white.
• If you mix yellow with purple and white, you get a gray-beige shade.

What colors of paint need to be mixed to get black?

Black is a basic monochrome color. It can be obtained by mixing magenta with yellow and cyan. Also, artists often mix green and red, but the resulting shade will not be jet black. Rich black color is produced by a mixture of orange and blue and yellow and violet. To get the shade of the night sky, you can add a little blue to the finished color, and a drop of white to lighten it.

What colors of paint need to be mixed to get blue?

Blue is the main color in the palette and it is quite difficult to obtain it by mixing. It is believed that it can be obtained by adding a little yellow to green, but in practice the result is more of a blue-green tint. You can mix purple with blue, the shade will be deep but dark. You can lighten it by adding a drop of white.

What colors of paint need to be mixed to get yellow?

The basic yellow color cannot be achieved by mixing other shades. Something similar happens if you add green to orange. Variations of yellow are obtained by adding other tones to the basic one. For example, lemon is a mixture of yellow, green and white. Sunny yellow is a mixture of basic yellow, a drop of white and red.

What colors of paint need to be mixed to get pink?

The easiest option is to mix red and white. The more white, the lighter the shade. It is important to know that the tone depends on which red you choose:

• Scarlet + white will give pure pink.
• Brick red + white - peach pink.
• Blood red + violet give a fuchsia shade.
• Orange-pink can be obtained by adding yellow paint to scarlet and white.

What colors of paint need to be mixed to get orange?

Orange color can be obtained by mixing red and yellow.

• A less saturated shade will be obtained if pink pigment is added to yellow paint.
• Terracotta orange is the result of mixing base orange with blue or purple.
• Dark shades are achieved by mixing red, yellow and black.
• If you add brown instead of black, you get red orange.

We vary the intensity of the tone by adding more white or black.

Color mixing table

Primary colors (blue, yellow, red) are almost impossible to obtain by mixing other shades. But with their help you can create the entire color palette!

Knowing the basic rules of color, it will be easier to understand the decoration and get the desired shade!

Everyone knows that by combining 3 primary colors (red, yellow and blue), you can achieve any other color. This theory was developed in ancient times by Leonardo da Vinci. The conclusion from the theory can be drawn that it is impossible to obtain primary colors by mixing others. But what to do and, for example, how to get red? To solve the problem, let's approach it from a practical side and consider how red is made in a printing house, how artists get it and what needs to be done for this.

Red color in printing is made by mixing other basic colors. The CMYK color model is used here. All differences in the colors of the model used are made by mixing the desired base colors:

• Blue - cyan
• Magenta (violet) – magenta
• Yellow
• Black

As in other color models, you need to take at least 2 colors, and in our case, red on printed products is made by combining 2 process colors: violet (magenta) and yellow. This method is also used to make color engravings. If you acquire these paints, you can make not only red, but also achieve shades of it by adjusting the ratio of yellow and magenta (violet). The range of red colors will be from pale purple to rich orange-red.

Mix yellow and magenta to get red

Information: In addition to printing, the CMYK model is the basis for the operation of most printers. It is also used for professional painting of cars, decoration of interiors and facades of buildings, and in fabric production.

Natural red

In addition to artificially obtaining color, it can easily be made from natural materials. This is how bedstraw flowers allow you to paint objects bright red. To prepare this paint, flowers are dried and boiled with alum for half an hour. Safflower and St. John's wort flowers are also suitable for making red paint by boiling water until thick. Cherry paint, similar in color, is made from orange lichen. You need to finely chop the lichen and mix it with baking soda (it is better to use a solution), wait 3-4 minutes and you can use it.

In nature, red color can be found quite often. Therefore, its different shades are sometimes named based on their natural hosts: fruits, minerals and berries. Among them you can find such names as: raspberry, pomegranate, cherry, coral, blue, wine, burgundy. All similar colors form the red spectrum.

Red shades in painting are made based on pigments of warm and cold shades. Quinacridone ruby ​​or violet should be considered cold, and light cadmium, orange sienna (natural and burnt) should be considered warm.

RGB and CMYK color models

Interaction with other colors

Many people wonder whether it is possible to make red from other colors, for example, pink. Our answer is no! If you replace purple with pink and mix it with yellow, then you won’t see red, only a semblance of it.

Burgundy is made from red by mixing with black. Depending on the types of paints, the ratio can reach up to 2:1 (you need 2 parts red and 1 black). By changing the concentration you can create different shades of burgundy.

Another question is, what happens if you mix red and yellow? Answer: we get orange.

The most popular question is: “what do we get when mixing red and blue colors?. To clarify, let's look at the RGB color model (red, green, blue), where you can clearly see that using blue in combination with red, we get purple.

Conclusion

The basic colors for red are yellow and magenta (violet). To create the desired color when mixing, you don’t have to use artificial paints; you can use natural ones. Red is the base color in the RGB model and must be mixed with green and blue to make other colors.

We offer you an interesting video to watch

Thanks to modern technologies, interior designers become real wizards. In the blink of an eye, they will make any room stylish and original. IN lately More and more attention is being paid to color design. The most popular are non-standard shades that can be obtained by mixing colors.

Process Basics

Manufacturers of paints and varnishes presented a fairly wide range on the market. But it’s not always possible to choose what suits the interior perfectly. Combining several shades will help save time and money.

In many specialized stores you can use the services of a specialist who will help you make the desired color. But if you know the basic rules of how to mix dyes, you can do it yourself at home.

One thing to remember when mixing important rule: Do not combine liquid products with the dry mixture. They have different indices, so the coloring composition may eventually curdle.

The most interesting part of the process is creating the desired shade. There are four primary colors:

• white;
• blue;
• red;
• green.

By mixing them you can get any others. Here are some illustrative examples:

1. You get brown if you combine red and green. To make a lighter shade, you can add a little white.
2. Orange is the result of mixing yellow and red.
3. If you need green, you need to combine yellow and blue paints.
4. To get purple, you need to mix blue and red.
5. Red and white will result in pink.

This way you can mix endlessly.

Mixing acrylic-based materials

Designers love acrylic paints the most. They are very easy to work with, and the finished coating has excellent water-repellent properties. Their use has several nuances:

1. The working surface must be perfectly flat and smooth. To do this, it needs to be sanded.
2. It is important that the paint does not dry out.
3. To obtain an opaque color, use undiluted paint. Conversely, you can add a little water for transparency.
4. To be able to slowly select the desired color, it is recommended to use. Thanks to it, the product will not dry out so quickly.
5. Use the edge of the brush to distribute the paint.
6. Mixing is best done with a clean instrument. In this case, the colors should be directed towards each other.
7. To make a light tone, you need to add white dye to the solution, and to get a dark one, add black. It is worth remembering that the palette of dark colors is much wider than light ones.

Here are some examples of mixing acrylic-based paints:

1. Apricot color is obtained by mixing red, yellow, brown and white.
2. Crafting recipe beige paint suggests a combination of brown and white. If you want a bright beige, you can add a little yellow. For a light beige shade you will need more white.
3. Gold is the result of mixing yellow and red colors.
4. Ocher is yellow and brown. By the way, it is considered popular this season.
5. Khaki can be made by mixing green dye with brown.
6. To get purple you need three different colors: red, yellow and blue.

Mixing oil paints

Oil-based paints are more fluid, which necessitates more thorough mixing of the compositions if tones are mixed. The specificity and properties of oil colors provide the following advantages:

• the tone will be the most uniform, so the paint is perfect for decorating any surface;
• If desired, you can leave veins in the paint, which will allow you to create unusual effects on the canvas or wall.

Stirring the oil

Before work, it is important to evaluate whether it is possible to combine individual tones with each other, what will happen in the end. If you introduce a little glossy paint into matte paint, the result will be inexpressive. Adding matte paint to the shiny one helps make the latter a little more subdued.

You can use these methods:

1. Mechanical. In one container, on a palette, different colors are combined by mechanically mixing them. The saturation of the finished mass is adjusted by adding brighter or lighter shades.
2. Optic. This method only professionals practice. Paints are combined to produce a new color when applied to a canvas or wall.
3. Color overlay. By layering strokes, a new tone is created.

Features of mixing paints

The mechanical method is the simplest, so it is recommended for beginners. When using color overlay, the result may differ from what was intended, which must be taken into account in advance. You can use the glaze method - first apply a darker color, then lighten it with strokes of light paint. Better practice connecting oil paints in small portions, learn how to create original effects, and then start creating paintings or interior decoration.

Workflow

Mixing several different colors, you can get large number a wide variety of shades. Which ones?

Shades of Gray

Quite often used in interior decoration. They help create shadow or unobtrusive color, as well as:

1. You can create a regular gray by mixing black and white.
2. To create cold shades, you need to add a little green to gray, and ocher for warm shades.
3. Grey-green is gray with white and green.
4. Gray-blue - gray, white and a little blue.
5. Dark gray is the result of mixing gray and black.

Brown tones

To make the dye, you need to mix:

• green with red;
• red with blue and yellow;
• red with white, black and yellow.

How to create other original tones:

1. You can get mustard if you add red, green and black dyes to yellow paint.
2. Tobacco shade is red, green, yellow and white.
3. Golden brown is the result of a combination of yellow, red, green, white and blue. In this case, there should be more yellow pigment.

Red tones

1. The basis for the pink shade is considered to be white. Red is added to it. The brighter the desired shade, the more red you should add.
2. To get a rich chestnut color, you need to mix red and black.
3. Bright red-orange color - red and a little yellow. The more of the latter, the paler the result will be.
4. You can give the dye a purple tint by mixing a few drops of bright blue and yellow flowers and red pigment.
5. To create raspberry, according to the recipe, you need to mix bright red + white + brown + blue. The more white, the pinker the hue.

Deep green is formed by combining yellow and blue tones. The saturation of the finished dye depends on the amount of each of them. To create shades, you need to add other colors to green:

1. For mint you will need white.
2. To obtain an olive color you need green and a few drops of yellow.
3. The shade of grass can be obtained by mixing green with blue. Yellow paint will help to even out the color.
4. The color of the needles is the result of mixing green with black and yellow.
5. Gradually mixing green with white and yellow, you can create an emerald tone.

Violet tones

Purple is made by mixing blue and red. You can also use blue and pink paints– the final color will be light, pastel. To darken the finished tone, artists use black paint, which is added in very small portions. Here are the nuances for creating shades of purple:

• for light purple, you can dilute the finished color with white in the required ratio;
• For purple, you need to add more red paint than blue.

Orange

When creating classic orange, combine one part of yellow and red paint. But for many types of paint you have to use more yellow, otherwise the color will turn out too dark. Here are the main shades of orange and how to get them:

• for light orange use pink and yellow, you can also add a little white paint;
• for coral, dark orange, pink, and white are required in equal proportions;
• for peach you need colors such as orange, yellow, pink, white;
• for red, you need to take dark orange and a little brown.

Important rule

Many people ask the question: is it possible to mix paints and varnishes from different manufacturers? It is advisable that the dyes being mixed are manufactured by the same company. It's even better if they come from the same batch. It is not recommended to mix dyes from different companies. They often have different properties, such as density, brightness, etc. Because of this, the finished coating may curl.

If you want to take a risk, you can combine a little bit of one and the other paint and apply the resulting solution to the surface. If it thickens or clumps, the experiment is a failure.

Computer help

You can mix several colors correctly using special computer programs. They help you see the final result and determine in percentage terms how much of a particular tone needs to be added. Such programs will help you figure out what shade you can get from the products that are available. They consist of several elements:

1. A button that removes tones from the set.
2. Color names.
3. Lines of input or output to or from a calculation.
4. Samples.
5. A button that introduces colors into a set.
6. Result windows.
7. New selection window and list.
8. Composition of the finished dye in percentage terms.

Mixing several different colors is a fairly common technique among designers. Unusual shades will help to decorate the interior profitably, make it original or even unique. You can even mix dyes at home. There are many recipes for creating one shade or another. For example, to get beige you need to combine white and brown, and to get pink you need to combine white and red.

It is recommended to always have a thinner on hand that will prevent the paint from drying out quickly. You should not mix products from different manufacturers, because the result will be a poor-quality coating. To find out the final result of mixing, you can use a special computer program.

Burnt sienna, ultramarine, cadmium yellow - these words sound like mysterious spells to the uninitiated ear. In fact, these are just names of colors, although a certain magic is, of course, present in them. One has only to pick up a brush and apply a few drops to the palette, and the imagination immediately comes to life. And all that remains for the artist is to mix the paints correctly to create real miracles.

It is sometimes difficult for novice artists to navigate the choice of colors for their painting, especially if there are many colors in their watercolor set. That is why it is recommended to buy paints with a smaller variety of shades, because it is much more interesting and, most importantly, more useful to mix the paints yourself. Ready-made colors often turn out to be quite harsh, far from natural muted tones. But a palette created with your own hands will not only help you find what you need for the desired image, but will also serve as a source of imagination and useful knowledge.

All shades of colors are divided into warm and cold. These names are absolutely telling, warm colors sunnier, summer colors: orange, red, yellow. Cold, respectively winter, refreshing: blue, light blue, violet.

The colors on the palette interact with each other, forming absolutely incredible variations. However, there are general trends, which are reflected in the so-called Itten circle. This is a model of combining primary and secondary colors.

The circle not only shows how they are formed secondary colors from the primary ones, but also visually divides them into warm and cold, respectively, some on the right, others on the left. It is important to understand that we are talking about base colors, not shades. After all, in comparison, some will turn out to be warmer, others colder.

Here is a small table on mixing primary colors.

Rules for mixing paints

To mix properly watercolor paints, you need to know some of their features and be sure to take them into account when applying them to paper. It's about not only about the division into warm and cold tones, but also about the hiding power of some colors, i.e. ability to overlap previous layers. Various shades are obtained not only by mixing two colors, but also by varying their quantity, as well as the amount of water used. For example, mixing the classic combination of yellow and green, when adding more yellow it will gradually change to a lighter lime green, and may even return to the original element.

Colors that are close to each other when mixed will not give a pure tone, but with their help you can get a very expressive shade, it will be called chromatic. If you combine colors located on opposite sides of the color wheel, you can get an achromatic, grayish tone. For example, a combination of orange with green and purple will give this effect.

Some paints give an undesirable reaction when mixed. It's not just about dirt on the drawing, it can lead to cracking of the paint layer, as well as to its darkening when drying. The combination of zinc white with cinnabar has a beautiful light pink tone, but later this combination darkens and becomes inexpressive. Therefore, it is, of course, considered optimal to achieve brightness and multi-color by mixing a minimum number of colors. Remember that some combinations give a lasting effect, while others are completely unacceptable.

How to get yellow color when mixing paints

Yellow is one of the three basic colors, so get it by mixing pure form impossible! However, you can achieve some results by playing with shades that are close to the palette. For example, to get gold, you will need regular yellow and a drop of red or brown. A good option is also to make them yellow with red and adding white.

How to get orange color when mixing paints

Much more productive is to mix yellow paint to create orange color. It is formed from a mixture of yellow and red. Adding a little brown and red can make it tangerine or gold, depending on the amount of ingredients. Bright orange comes from classic orange with brown and white.

How to get a mint color when mixing paints

How to get black by mixing paints

Each set of watercolors contains black color, but if for some reason you don’t have it, or you really need dark shade, then you can mix it yourself. You will need to combine red, yellow and blue in equal proportions. Great color comes from blue and brown. Also suitable for mixing are red, green, yellow, and purple. Soft black colors come from cobalt yellow, cobalt blue and madder pink.

How to get green color when mixing paints

Green comes from yellow and blue. However, in watercolors in its pure form it is rarely used. Much more popular colors are sunny green or olive green, midnight green, their combination and other options. Solar green uses ultramarine and cobalt yellow, olive is prepared from the same flowers with the addition of burnt sienna, and midnight is made from FC blue, yellow and a drop of black.

How to get turquoise color by mixing paints

Turquoise is better known by its other name, aquamarine. On the color spectrum, its place is between green and blue. Therefore, they will be needed for mixing. You will need a slightly larger amount of cyan blue than green. However, this depends on the required color intensity. For a more subtle turquoise, you can add a drop of white or light gray paint. For a rich aquamarine, you will need to take a bright shade of blue, green and a little yellow.

How to get burgundy color when mixing paints

The burgundy color owes its name to the French wine of the same name. This is a solemn, deep color, you can mix it using three parts red and one blue. For a warmer shade, you can introduce a little yellow, or combine bright scarlet in half with brown. A cooler tone will be obtained from red, brown and black; it comes out so rich that it must be diluted with water.

How to get blue color by mixing paints

It’s very easy to get blue in watercolors; just dilute ultramarine with water, and you’re done. However, for those who are not looking for easy ways, there are always a couple interesting ways. One of them is the use of white: for 2 parts of ultramarine you will need one part of white paint. You need to dilute the blue color gradually to adjust the saturation of the tone. For a bright blue color you will need the same blue, a drop of red and white. Another shade can be obtained by adding to this mixture one part of not red, but green paint.

How to get crimson color when mixing paints

Bright and energetic crimson color has a whole range of shades. The main one can be obtained by combining red, blue and a small amount of white. To tone down a too bright color, add a little black. Instead of black, you can use brown, and instead of blue, turquoise or cyan, or purple, the results will be very extraordinary.

How to get brown color when mixing paints

You can get brown color in various ways. The simplest one is mixing red and green paints. It can also be made from purple and yellow, the more yellow, the lighter the tone. Another way is to use red, blue and yellow, but you need to mix them gradually, adding more paint to adjust the shade, otherwise a black color may form, especially if red and blue predominate. A good tint comes from mixing orange and blue.

How to get purple color by mixing paints

From school curriculum It is known that purple comes from red and blue colors. However, in reality this is not entirely true. It is quite difficult to obtain a high-quality bright shade, and what comes out of these two colors is more like a nondescript burgundy. So, in order for a bright, rich lilac color to come out in a company of red and blue, the latter must predominate. In this case, the shade of red should be taken as cold as possible, otherwise there is a high probability of mixing brown rather than purple. Blue also has its own requirements - it should not contain any greenish notes, take only in its pure form, for example, cobalt blue or ultramarine. To lighten the final tone, you can use a small amount of white. An important nuance is that after drying the color fades a little.

How to get blue by mixing paints

Blue is a basic color and cannot be mixed with other colors. But with the help of blue paint and auxiliary paints you can get many shades of it. For example, from bright ultramarine with white lead you can get sky blue. For a rich blue tone take ultramarine with dark turquoise. A beautiful blue-green comes from blue with a little yellow. White will make this shade paler. The famous Prussian blue is obtained from mixing blue and green in equal parts. If you take 2 parts blue and 1 part red, you get blue-violet. And if you take pink rather than red, you get royal blue. A complex gray-blue color, excellent for drawing shadows, can be obtained from blue and brown. A rich dark blue will come out of blue and black, combining two to one.

How to get pink color by mixing paints

Usually pink color is obtained from a combination of red and white; its shade will depend on the proportions. But you can also experiment with various types red The bright scarlet gives a wonderful effect, the pink color turns out to be very pure. Brick red gives a peachy tint. And bloody alizarin and white form a fuchsia color. By adding drops of purple or yellow to the mix, you can get unexpectedly interesting results. Not everyone accepts the use of white in watercolor, then you can get pink simply by diluting any red color with water. In a low concentration, this will be what you need.

How to get beige color when mixing paints

Beige or flesh color is necessary for the artist to depict people, faces, portraits, etc. Delicate beige can be obtained from white with the addition of ocher, cadmium yellow and red, sienna and sometimes ubra in minute quantities for light shading. The ratio of ocher in comparison with other components will be higher, all ingredients need to be introduced little by little, adjusting the required color intensity. Unfortunately, there is no exact recipe; each artist has his own vision of this issue.

How to get lilac color when mixing paints

The lilac color is quite close to purple, they are even called related. They are both cool shades and stand on color wheel close enough. Actually, the main recipe lilac color- this is the dilution of violet with white or water.

How to get gray color when mixing paints

You never see black shadows in watercolor paintings; they are usually painted with the same colors as the rest of the details, but with the addition of a darker element, for example, gray. This color in watercolor can be obtained by combining black with a large amount of water or white. Interesting shades are obtained from cobalt blue with the addition of burnt sienna or burnt umber.

Mixing oil paints, mixing technology

Mixing oil paints has slightly different specifics, unlike watercolors. Although the basic recipes for obtaining certain flowers are, of course, general. Basic Mixing Techniques acrylic paints:

• Combining colors on the palette, i.e. physical, to obtain a new tone or shade for the purpose of applying to a drawing. If one of the paints is lighter, then it is applied in small strokes over the dark one, provided that both paints have the same covering properties. When clear paint is mixed with opaque paint, the result is opaque paint. If two transparent paints are taken, then the result will be transparent. With this method, a decrease in the purity and intensity of tones is inevitable.
• The method of overlaying paints, otherwise known as glazing, involves layering transparent paints on top of each other directly on the image. Of course, the previous layer must be completely dry.
• Color joining method. If you apply brush strokes very tightly together, then visually mixing of these colors occurs, like a kind of optical illusion.

Oil Paint Mixing Chart

Mixing acrylic paints, technology

Acrylic paints are a great option for beginning artists and painting enthusiasts. They are universally suitable for paper, fabric, glass, wood, etc. Their only drawback is their rather high cost, and therefore acrylic sets usually do not have a very rich palette. But nothing prevents us from expanding it using mixing technology. You must have 7 colors: red, pink, yellow, blue, brown, white and black. And then, using a special table, you can easily mix acrylic yourself.

Acrylic paint mixing table

Mixing gouache paint colors

When choosing gouache, you should not focus on large sets; they look very impressive and presentable. But in fact, you will have to overpay for completely unnecessary colors. It is much better to focus not on the number of jars, but on their volume. After all, when the primary colors run out, you will still have to buy new paints, and the unused ones will remain as dead weight. Moreover, it is very easy to obtain new colors and shades of gouache, as simple as holding a brush in your hands. There are no special rules here, except that you will need a color combination table.

Gouache paint mixing table